Analysis of the difference between booster pump and pipeline pump

As the booster pump and the pipeline pump are the booster pumps, they are all booster pumps, so many users often confuse the two pumps. In fact, booster pump and pipe pump biggest difference lies in the different functions. Pipeline pump is responsible for conveying the pump body of self-flowing water; and pipe pump can pump the lower part of the body and then transported. Analysis of the difference between booster pump and pipe pump Pipeline pump is usually a vertical structure of the pump products such as pipeline booster pump or pipeline centrifugal pump their import and export are in the same horizontal line can be directly connected with the pipeline , The pipeline pump motor above the pump body, pipeline pump inlet and outlet port of the same size, the pump body has a square base below, you can easily install the concrete foundation, the small lightweight pipe pump can also You do not need a fixed base can be directly connected to the support by the import and export pipeline pipeline pump, but in this case the pipeline at both ends of the pipeline pump must be supported and fixed. At present, the most commonly used pipeline pump product is the ISG pipeline centrifugal pump. This series of products have good energy-saving effect and very little vibration and noise. The product is a pipeline pump product optimized and designed on the basis of the original old-type pipeline booster pump , Which can be used to deliver water or a variety of liquids similar to water. Stainless steel vertical chemical pumps also deliver corrosive media. If the explosion-proof pipeline pump with outdoor explosion-proof motor can also be suitable for installation in open-air use, such as oil depot and other environments. In fact, the definition of booster pump and pipeline pump, booster pump is in the original pipeline on the basis of their own pressure and then increase the part of the pressure to reach the water to more distant place, is a self-priming pump Products, and domestic water pipe network pressure is not enough still need about 1kg pressure to make the normal operation of the water heater shower at home at this time tap water pipe installed above a household booster pump to meet the requirements. The above is the difference between the pipeline pump and booster pump description, in general, the scope of the function of the pipeline pump booster pump is more extensive. Extended reading: "Industry Leader" magazine This article belongs to Industrial Internet (Xiamen) Technology Co., Ltd. All are welcome to reprint, please indicate the author and source. Author: Asian pumps Network Editor: April (QQ / micro letter:) starting: http: //beng.liuti.cn/ (service hotline:)